 |
|
Share
 InSinkErator Evolution Essential: Up to 50% offThe model that fits the widest range of customer needs, InSinkErator Evolution Essential� features MultiGrind� technology to grind everything from celery to potato peels, and SoundSeal� for quiet performance. See all Product Description. |
InSinkErator CRD-00 Power Cord Kit Product Detail
The InSinkErator CRD-00 Power Cord Kit is easy to install and includes a three foot, UL Listed cord, strain relief clamp, wire connectors and installation instructions. One installed, the disposer plugs directly into a standard wall outlet. This genuine In-Sink-Erator product meets Underwriter Laboratories Inc. SPT-3 category for insulation thickness and moisture resistance. IN-SINK-ERATOR POWER CORD *Fits most garbage disposers *Original in-sink-aerator replacement part *16 gauge wire *1- Romex connector, 1- 3' wire grounded plug and cord, 2- wire nuts
There are many myths surrounding a disposer, but let's put the biggest one to rest: there are no blades. A disposer works more like a cheese grater than a blender and shreds or grinds food waste rather than cutting or slicing it.
When food waste is placed in a disposer, it lands on a turntable spinning at high speed. Centrifugal force and the impellers (or lugs) attached to the turntable push the food waste against a stationary shredder ring. The food is ground into small particles so that, when mixed with water, it can safely flow through your plumbing and into your wastewater system or septic tank.
How to Install a InSinkErator Evolution Disposer
Step 1: Install sink-mount assembly (new installation or different sink mounting)
Turn off the electrical supply at the circuit breaker or fuse box. Disconnect the sink drain and plumbing connections. Clean off the sink opening. Using plumber's putty, install the new disposer sink flange into the sink drain and connect the sink-mounting assembly. (Skip step two and move to step three.)
Step 2: Remove old disposer (replacements with similar sink mounting)
Turn off the electrical supply at the circuit breaker or fuse box. Disconnect the old disposer's plumbing connections and remove the disposer from its mounting. Disconnect the old disposer�s electrical connections.
Step 3: Make electrical connections
Connect the wiring to the new disposer following the code in your area.
Step 4: Dishwasher connections
If you are connecting the disposer to a dishwasher, be sure to knock out the dishwasher plug and remove the loose plug from the disposer. If you are not connecting the disposer to a dishwasher, then leave the plug intact.
Step 5: Connect new disposer
Mount the new disposer onto the sink-mount assembly and reconnect the plumbing--including the dishwasher hose if applicable. Turn on the electrical power to the disposer at the circuit breaker.
Step 6: Make plumbing adjustments
Lock the disposer in place, make final plumbing adjustments, and check for any leaks.
Recommended tools for installation: Slotted screwdriver, Adjustable pliers, Plumber's putty (if replacing sink flange), Electric hard-wire connector, 3/4-inch conduit connector, Power-cord kit (if needed).
Step 1: Install sink-mount assembly (new installation or different sink mounting)Turn off the electrical supply at the circuit breaker or fuse box. Disconnect the sink drain and plumbing connections. Clean off the sink opening. Using plumber's putty, install the new disposer sink flange into the sink drain and connect the sink-mounting assembly. (Skip step two and move to step three.)
Step 2: Remove old disposer (replacements with similar sink mounting)
Turn off the electrical supply at the circuit breaker or fuse box. Disconnect the old disposer's plumbing connections and remove the disposer from its mounting. Disconnect the old disposer�s electrical connections.
Step 3: Make electrical connections
Connect the wiring to the new disposer following the code in your area.
Step 4: Dishwasher connections
If you are connecting the disposer to a dishwasher, be sure to knock out the dishwasher plug and remove the loose plug from the disposer. If you are not connecting the disposer to a dishwasher, then leave the plug intact.
Step 5: Connect new disposer
Mount the new disposer onto the sink-mount assembly and reconnect the plumbing--including the dishwasher hose if applicable. Turn on the electrical power to the disposer at the circuit breaker.
Step 6: Make plumbing adjustments
Lock the disposer in place, make final plumbing adjustments, and check for any leaks.
Recommended tools for installation: Slotted screwdriver, Adjustable pliers, Plumber's putty (if replacing sink flange), Electric hard-wire connector, 3/4-inch conduit connector, Power-cord kit (if needed).
InSinkErator CRD-00 Power Cord Kit Features
| |
|
Electrical Connections
Check to see if your disposer is hardwired or has a power cord plugged into an outlet. Depending on the electrical code in your area, you will have one type of connection or the other. Most disposers are sold without an attached power cord so that they may be used in either application. If you need a power cord, these can be purchased separately as an accessory. You may also purchase a unit with an attached power cord for this application.
Check to see if your disposer is hardwired or has a power cord plugged into an outlet. Depending on the electrical code in your area, you will have one type of connection or the other. Most disposers are sold without an attached power cord so that they may be used in either application. If you need a power cord, these can be purchased separately as an accessory. You may also purchase a unit with an attached power cord for this application.
Do It Yourself in 2012Save money this year by tackling home improvement projects yourself. Save up to 40% on the power tools, fixtures, and lighting you need for the job.
Read also: insinkerator stp ss sink stopper_19 at our InSinkErator Evolution online store or buy InSinkErator CRD-00 Power Cord Kit today with free shipping for limided time while stock last to avoid disappointment.
